Autocad plant 3d lesson

For now, you'll leave this as is. Select the Properties tab. Take a look at the size. Where did this information come from? It came from pump P in the diagram for this project. By picking a number that was already associated with a symbol, all of the relevant information is passed to the model. For the tag for the nozzle, change it from Suction to Discharge , and you'll see the 4" connection.

At any time, you can select the part, and use the Nozzle tool to change sizes if needed. Now that's cool! Select Create. You'll now be prompted to place the pump. This example includes a little extra help, including a couple of UCS planes for the main platform and top platform , to make placement a little easier.

Take a look at the view cube. It should read Main Platform. This will place the pump at that elevation in the project. If not, pick it under the UCS option for the view cube. Pick a point between A1 and B2 as demonstrated here. A compass appears, giving you rotation options. Rotate the pump degrees. The pump will be placed. Using the View Cube, go to the Southeast isometric view. You'll see the pump sitting on the main platform. Undo the view change. Pick the pump, right-click and then select Copy Selection.

Pick a start point, and then copy the pump up 5' from the original. Pick the new pump, right-click and select Assign Tag. Change the number to Click Assign to complete the command. The pump is now associated with the symbol for P Pick the pump again, and choose Modify Equipment. When the dialog appears, note how the nozzles are now named N-1 and N This occurs since you are working from a copy instead of an original.

You will have the right understanding. In 3D Piping drawings including design ideas. And techniques in this course This will save you time on design work 3D Piping project. Enable students to open the AutoCAD Plant 3D program, and then set up the basic program according to all chapters in Chapter 1 in order to display the results. And help your computer perform better. In case there are few resources. The author explains how to be a topic list so that it can be done more easily. Including creating and managing the nozzle of equipment is easier.

In this chapter you will learn basic 3D Piping, how to start piping, how to put fittings, control the direction of the pipe.

To be able to connect to each equipment point, then Generate Isometric Piping drawing. That things to define in the Piping spec. The first part is the scope of the Piping component, the smallest pipe. To the largest size used in the project including various types of fitting, inside will specify the code and material of the pipe that will be used in the project including devices such as Valve, Bolt Nut, and Gasket.

The program can be used in the AutoRoute is due to the Branch table. Prev Lecture. A Recap on Plant Design. Industry Talk. Models are Great, But Industry 4.

Instructional Demo.